Re: IH 966T or 1086

Posted by RickB on December 22, 2006 at 12:02:31 from (67.158.164.175):

In Reply to: IH 966T or 1086 posted by Farmer in the Dells (WI) on December 22, 2006 at 06:15:50:

The 966 was built with a 414 cubic inch naturally aspirated engine. Many 9's were fitted with aftermarket chargers. The 1086 was built with a 414 cu in turbocharged engine. Never heard of anyone taking a charger off a 10. Either tractor could have had a different crank and pistons installed in the original block to build them up to either 436 or 466 cubic inches by now. The 9 was built with a smaller clutch and different flywheel than the 10. Used to be that the 10's flywheel was available in the aftermarket but the 9's was not so some were converted when the button clutch discs finished off the flywheels.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]