Re: 5088vs4440vs2294

Posted by Steven@AZ from ND on November 30, 2006 at 17:15:11 from (24.121.155.253):

In Reply to: 5088vs4440vs2294 posted by Amo in nebraska on November 30, 2006 at 16:53:55:

I am an IH man - born and raised red... but I would pick the 4440 out of those three in a heartbeat.

We have a 2590 Case - it is a good tractor, but the 3-speed powershift has splits that are too big and it jumps when you shift it. We use it for pretty much everything - heavy tillage, stack mover, baler, loader, grain vac, etc. Nice powerful tractor, but in my opinion the transmission is out-dated compared to quad range.

We also have an 8630 JD 4x4. The quad range in the JD is a darn good system and they run many hours trouble-free. I like the splits on the quad range - no jumpy shifts, and synchronized between the gears you need to clutch for. Lots of gear combinations so you can get the right speed for the job. 4440 is a popular loader tractor in the area of ND where I am from, a couple of our neighbors have them and enjoy them.

Just my opinion and experience...

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]