Re: Seating bead on rear tire

Posted by 1945 A on November 28, 2006 at 05:45:13 from (199.245.220.253):

In Reply to: Seating bead on rear tire posted by super99 on November 27, 2006 at 16:51:44:

Here"s a thought, and that"s just what it is, but, I"m reminded of a time when there used to be a small tube like tool, that was used to first spread the sidewalls of tires. You put this device around the middle of the tread, and with an adjustable D ring/strap, you pulled it tight, then inflated the tool, and it would force the sidewalls out, then, as the tire was being inflated, released the air in the tool.
Anyway, just a long explanation of the possibility here---wrap a cable or chain around the middle of the tractor tire tread,(tire deflated), then, with a come along, tighten the cable/chain to spread the tire, with plenty of lube, it might accidentally seat on the rim, then air it up.
Like I said---just a thought.
Good Luck!

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]