Re: what do you guys think?

Posted by Don L C on November 26, 2006 at 13:57:27 from (71.79.19.153):

In Reply to: Re: what do you guys think? posted by Glen in TX on November 26, 2006 at 12:22:34:

What works well when adding a square hitch to a truck frame is.....weld a length of 2" tubing(4 to 6'long) from the front end of the hitch tube on to a cross member using a 4 or 5" piece of 3/8" angle to the front end and bolt it to the cross member....bolt the angle on then weld the 2" tube on that way it is bolted soild and level, tube can be weiled at a angle.....result is a very strong hitch.....

Replies:

• Re: what do you guys think? Glen in TX 15:00:39 11/26/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]