Re: Thanks Jon.

Posted by Jon Hagen on November 25, 2006 at 16:05:43 from (69.26.30.55):

In Reply to: Re: Thanks Jon. posted by midlam on November 25, 2006 at 00:04:59:

You would need to move the field lead from the third brush to the "hot" brush,then connect the F terminal to ground through a 2 or 3 unit 12V regulator. I have done this,and it works to a point,but the 6 v generator is working hard to make the 13.5 V necessary to charge a 12V battery. Also,you have a better chance with a high rpm engine like a car/pickup,a slow turning tractor engine may not turn a 6V generator fast enough to charge a 12V battery. The 6V field coils also load the regulator contacts above what a 12V field would,so regulator point and resistor life is shortned.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]