Re: OT-1991 Olds revisited - Bob

Posted by Richard H. on November 21, 2006 at 07:28:57 from (208.70.45.167):

In Reply to: Re: OT-1991 Olds revisited - Bob posted by bradk on November 21, 2006 at 06:03:48:

Brad this is a HEI with external coil and it has a 2 pin and a 4 pin conn. at the dist. I will gleefully go out and look for this one wire.
The 2 pin conn. I was using is the only way I could get the timing right before shut down. Also it is probable the conn. I"m using is actually one wire if it is a loop thru a switch or sensor as part of an I.O circuit. IMHO this would not let the cpu tell the ign control module what the timing should be until it is reconnected.
I will post back and let all know how this comes out. Richard

Replies:

• Bradk Richard H. 10:56:18 11/21/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]