Tractor Talk Discussion Board |
Re: what exactly is strip till and vertical till.
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by paul on November 20, 2006 at 18:58:45 from (66.44.132.154):
In Reply to: what exactly is strip till and vertical till. posted by Youngfarmhand on November 20, 2006 at 11:52:20:
Well the experts are over on newagtalk - Jim sells strip equipment, but: Strip till is making a 10 inch wide strip in fall or spring, with 20 inches of unworked soil. The allows some soils to warm up & dry out for planting. You use 1/3 the fuel, 1/3 the iron, etc. for your tillage. This would be for 30 inch corn & bean planting, or corn on corn. Vertical tillage is a deep, close to 2 foot, very skinny shank that will cut trenches into your field 30 inches apart. This breaks up compaction layer, without creating a new, deeper compaction layer like rippers, chisel plows, etc would do in some types of soils. Water, roots, nutrients, fertilizer can get down into those skiny trenches, which is good for corn. This is only done one or 2 years, then not again for 5 years or more. With either, you typically drive in the same spots, & till the same spots. This limits compation, and in the case of vertical tillage the soil structure is supposed to firm up & be able to carry wheel traffic much better, yet allow friable dirt that is good for plants to grow in. The soil keeps it's structure by not being tilled. Both are versions of min till, you don't plow & field cultivate any more. It depends on your soil type, moisture, climate, & etc. if either of these work for you. Some places it is a perfect fit, others it won't work at all. --->Paul
Replies:
Home
| Forums
Today's Featured Article -
Sunday Drives - by Cowboy. Summer was finally upon us here in Northern Maine. We have two types of industry up here, one being "Forestry" (Wood Products) and the other "Farming" (Potatoes). There is no shortage of farm tractors and equipment around here! I have been restoring old Farm Tractors for the past 6 years, and have found it easier and less expensive to hit all the auctions and purchase whole tractors for parts needed. My wife who works at a local school, and only has weekends and summers off, while on t
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|