Tractor Talk Discussion Board |
Re: Re: Case re-ring pistons won't work
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk Discussion Board ]
Posted by Dick L in NW Ohio on September 02, 1999 at 12:39:49 from (209.130.146.203):
In Reply to: Re: Case re-ring pistons won't work posted by IvanB on September 02, 1999 at 07:23:55:
Last spring I rebuilt an engine that had a new ring job before I bought the tractor. When I put the (new ring) off the piston down in the sleeve it had a 1\4" gap between the ends of the ring. specs. called for .007 to .014 not .250. The rings must fit the sleeve, and pistons can have a little more ware than the specs. call for but not a lot.
Follow Ups:
Post a Followup
|