Tractor Talk Discussion Board |
Re: Pulling question
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk Discussion Board ]
Posted by C. Ziegler on September 02, 1999 at 09:35:35 from (208.9.65.2):
In Reply to: Pulling question posted by Bill on August 24, 1999 at 07:21:40:
Bill, to minimize the front-end lift effect from your drawbar, adjust the drawbar to be as high and as close to the rear axle as possible. Since the rear axle is the point around which the tractor will pivot as the front end lifts in the air, the smaller you can make the distance between the pivot point and the force pulling down (from the sled), the less likely your front end will be to come up. I have tried different drawbar settings on my Super 77 Oliver puller and have found this to make quite a difference.
Follow Ups:
Post a Followup
|