Re: Bearing oil cup

Posted by JackT on November 16, 2006 at 11:25:31 from (4.228.123.148):

In Reply to: Bearing oil cup posted by Bill Okrasinski on November 16, 2006 at 10:26:15:

Really shouldn't need drip oilers (glass reservoir with sight glass for viewing drip rate) on a saw rig. Oil cups (for babbitt bearings)or grease cups (for bronze or ball/roller bearings) should do just fine. You can get either from McMaster Carr. www.mcmaster.com They have drip oilers (called gravity-flow oilers) too if you really want them.

Their website is worth visiting. You can spend hours looking at all the neat stuff you can't get anywhere else.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]