Re: Hydraulics Questions

Posted by Allan In NE on November 11, 2006 at 05:45:35 from (148.78.243.26):

In Reply to: Re: Hydraulics Questions posted by Roy Suomi on November 11, 2006 at 05:27:04:

Hi Roy,

That's why I'm asking.

Those darned regulators will limit the flow to 10-gpm, which is waaaayyyy lower/slower than the original system. That just will not do.

I don't see why I can't just pull that regulator cover, remove the regulators guts and put the cover plug back on? That would allow the original systems pressure and flow to go right on thru to the spool and out?

Really working with a "space restriction" issue here; due to the way the cab is built, this is the only valve that I've found that will "fit" and I'm thinking of just tiying the valves together with some close nipples?

The only thing I think I'd be loosing is the "multifunction" of more than one valve at a time. It would be like running a F-11 loader vs a F-10, but I can live with that.

Thanks,

Allan

Replies:

• Re: Hydraulics Questions Gerald J. 09:40:27 11/11/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]