Re: JD 401 B industrial

Posted by Roy Suomi on November 09, 2006 at 18:55:50 from (69.165.41.192):

In Reply to: JD 401 B industrial posted by 37 chief on November 09, 2006 at 14:58:57:

I've done it on 6 cylinder engine [ Deere 544-A loader] If done right, will last for years..You'll need to find a reputable shop to do this..I had to scrap a block because someone else screwed up the clearances , Piston was tapping the head . This was on a 410 backhoe..I found an air compressor with a junk rotary screw compressor..Changed the rear plate and it bolted right up... A buddy of mine just happens to have one.. $ 1500.00 Runs sweet..NE Ohio

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]