Re: tie rod end

Posted by jdemaris on November 09, 2006 at 07:06:00 from (69.67.229.110):

In Reply to: tie rod end posted by b woodworth on November 09, 2006 at 05:45:53:

Try Import Tractor Parts at: http://www.sphosting.com/dsl/index.html

I don't own any David Browns - but I've had to get tie-rod ends for lots of odd-ball stuff. Usually, if you measure the tapered pin diam. and thread pitch, diam, etc. you can usually find an end from a more common tractor that will fit.

Replies:

• Re: tie rod end Ultradog MN 19:23:09 11/09/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]