Re: Hyd. Fluid Contamination

Posted by souNdguy on November 02, 2006 at 10:49:01 from (12.64.134.226):

In Reply to: Re: Hyd. Fluid Contamination posted by Ed1 on November 02, 2006 at 09:42:01:

If i knew an implement had some sort of UTF in it ( NH 134d, Hytran, Hygaurd 303.. UDT. etc.. ) I wouldn't worry about it. if I thought it had hyd oil, or gear oil in it.. I'd purge as much as i could before connecting to my system. If the oil in the implement was water laden and emulsified.. I'd purge it 100% before interconnection.

All my hy implements use UTF.. however if i had any that ran on the ford N.. then I'd keep them seperate.. Ford N has 90wt in the common sump..

Me personally.. I'd also avoid ATF in my common sump machines. i don't see any final drives that spec ATF.. there must be a reason for that.

Soundguy

Replies:

• Re: Hyd. Fluid Contamination MN Bob 14:19:40 11/02/06 (1)
  • Re: Hyd. Fluid Contamination souNdguy 20:50:05 11/02/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]