Re: Hydraulics: Help Me Think

Posted by R. John Johnson on October 31, 2006 at 16:15:50 from (205.200.43.39):

In Reply to: Hydraulics: Help Me Think posted by Allan In NE on October 31, 2006 at 16:07:55:

Allan

I think you can get a a so called 3 way valve. This is specially designed to work on single acting cylinders. Plumb one line form the valve to the base of the cylinder. One thing to think about, when you buy a valve, make sure it has a large enough flow rating to handle the GPM that PTO pump puts out. If you want it real slick, get a valve that uses a joystick. This frees up a lot of room in the cab.

My two cents.

John

Replies:

• Re: Hydraulics: Help Me Think Allan In NE 16:23:00 10/31/06 (5)
  • Re: Hydraulics: Help Me Think R. John Johnson 16:38:13 10/31/06 (3)
    • Re: Hydraulics: Help Me Think Allan In NE 16:41:23 10/31/06 (2)
      • Re: Hydraulics: Help Me Think WyoDave 16:55:58 10/31/06 (0)
      • Re: Hydraulics: Help Me Think R. John Johnson 16:46:14 10/31/06 (0)
  • Re: Hydraulics: Help Me Think WyoDave 16:30:47 10/31/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]