Re: wood blocking for holding up a tractor

Posted by Dan-IA on October 29, 2006 at 13:05:33 from (66.43.223.231):

In Reply to: Re: wood blocking for holding up a tractor posted by Weldon K on October 29, 2006 at 10:46:51:

Yep, this is what we do. Cut a tree down, and then take a heavy chunk of the trunk. We usually don't go smaller than 18-inch-diameter trunk to do it though. 24 or bigger is preferable. Used a 30-inch block to support the frame of a 510 combine while replacing the whole wheel hub for a big front tire. We heard loud popping and cracking noises, but the block held the combine until the job was done.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]