Re: Will It Work?

Posted by rustyj14 on October 29, 2006 at 09:50:05 from (71.245.179.40):

In Reply to: Will It Work? posted by Allan In NE on October 26, 2006 at 18:16:42:

Had an old military style Jeep, CJ2A, civilian model--didn't have a heater! BRRR! Here in the state of PA., a heater is necessary!
Couldn't ante up the gold to buy one, so i made one. I made a tin box from sheet metal. Mounted a small heater core in it, and had round openings on both sides. Ran hoses to the engine and back. Cut a hole in firewall, and mounted the tin box on it. Then ran a large flex hose from heater box out to the engine compartment, to pick up air from the engine fan. set hose close to fan!When the engine ran, air was blown back thru the flex hose, thru heater core, into the cab area. Worked well!

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]