Re: Kingston Model L3 Brass Carburetor Help!!!!!

Posted by Sloroll on October 13, 2006 at 19:06:42 from (12.219.228.192):

In Reply to: Kingston Model L3 Brass Carburetor Help!!!!! posted by Joey Lasselle on October 13, 2006 at 17:41:23:

Those L3s are incredibly simple. Make sure it is thouroughly clean. Only give your tractor one qtr turn of choke as they are very prone to dumping a large volume of gas into the manifold with a little choke. Start with the jet 1&1/2 turn open and adjust from there. Make sure your float is good too. Larry Swenson has rebuild gaskets, bowls, needles and floats for them. You have my E-mail Joey

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]