Re: Pre-lube setup for diesel engine

Posted by Bob on October 07, 2006 at 21:38:33 from (69.178.229.154):

In Reply to: Pre-lube setup for diesel engine posted by Loon-Yi on October 07, 2006 at 20:58:04:

Buy a cheap plastic pump up compressed air garden sprayer at WaldoWorld for about ten bucks.

Cut the spray tip off the plastic wand, and hose clamp a piece of hose on the wand, and, using an appropriate sized hose barb adapter, connect the other end of the hose to the main oil gallery, perhaps at the pressure gauge port.

Put some fresh engine oil in the sprayer, pump it up, and the engine will get lubed.

(Yes, I've done this, and it DOES work. Cheap and easy.)

The oil may deteriorate parts of the sprayer over time, before you can use it again, but, heck, for about $10.00, no big deal.

Replies:

• Re: Pre-lube setup for diesel engine Loon-Yi 21:58:33 10/07/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]