Re: 706D PTO Problems

Posted by the tractor vet on October 07, 2006 at 19:48:53 from (75.24.28.38):

In Reply to: 706D PTO Problems posted by Big un on October 07, 2006 at 16:55:49:

Well could be the pickup tube has gotten loose and is letting it suck air around the small seal on the tube . or it vary well could be that the clutch pack is just about done for . Don't know for sure as i am niot there doing the checking and also what the lockup pressure is on full engaugement and start up . Here ya got to have the test fitting and a 600 lbs . gauge and see just what in the hello is going on . I like the PTo pressure set on a 706 up around 245-260 .

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]