Re: Fuse wire

Posted by Bob M on October 03, 2006 at 11:44:59 from (151.190.254.108):

In Reply to: Fuse wire posted by Vernon Fisher on October 03, 2006 at 09:56:58:

Vernon - The quick answer is "it depends..."

If the tractor has an original style 4 terminal regulator the fuse supply should be connected to the regulator "L" terminal.

However if it's got only a 3 terminal regulator or has an alternator conversion simply connect the fuse wire to the ammeter post that's NOT connected to the battery.

A simple test: After you get the fuse wire connected turn on the lights (presuming the lights work) or ignition without starting the engine. The ammeter should indicate discharge (should deflect to the left of 0).

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]