Re: Cutout problem

Posted by noncompos on October 02, 2006 at 16:29:39 from (71.34.66.23):

In Reply to: Cutout problem posted by Don E. Foster on October 02, 2006 at 14:01:27:

If you haven"t fiddled with it already it might be best to just exchange it (unless you"re out 40 miles from nowhere). If it"s still giving trouble, and you don"t want to exchange it, see if the points are corroded, eroded or roughened enough to keep sticking even when they"re adjusted right. You have to use the finest point file you have, be very gentle, and polish them with a piece of cloth. Be sure to file/wipe in line with the slight arc the top point describes as it closes-don"t file/wipe across the points, which is the easiest way, but leaves minor irregularities you can"t see but that may stick the points.. It"s hard and a pain, but cut-outs can be delicate.

Replies:

• Re: Cutout problem dan hill 02:35:07 10/05/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]