Re: ford 2000 carburetor problems

Posted by Rick Kr on September 29, 2006 at 07:03:26 from (198.208.159.17):

In Reply to: ford 2000 carburetor problems posted by jmsurrette on September 28, 2006 at 17:25:37:

Went through my carb 231 2 years ago, same as yours.

You say the float is adj. right and the needle/seat is working. If those are right, I'm not sure where all the extra gas is coming from.

I had very similar problems to yours, and ended up setting the float a little lower than spec. The new needle helped a lot too.
If I remember the seat is not replaceable in your carb. So a new needle will only help so much if the seat is trashed.

It chokes out when you give it throttle, thats sounds like the accelerator pump. Is it from lack of gas or too much when it chokes? Make sure the accel pump is sliding right.

Rick

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]