|
Tractor Talk Discussion Board |
PHOTO no 1 - ploughing match
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by David in Wales on September 26, 2006 at 13:17:46 from (86.140.241.224):

Hi Gang; This is the English built Fordson N tractor from the 1940 era. Still has wide fenders but the top supports are now pressed steel, and the fronts cut away to save steel in wartime. The Fordson N accounted for 95% of all tractors on use in Britain during WW2. The plough is a Ransomes fitted with extra long mold boards (bodies) which produce the "oat seed furrow" which is shallow & narrow and set up to a pointed top - the guy is hold one of the "boats" which are steel towed by a chain to form & press the furrow into the ^ shape. The furrows would be 8 inches wide & 4 inches deep. The reason for leaving the furrows with 2 sides exposed is that the frost can break down the soil over winter to assist making a seedbed in the spring. Cheers David
Replies:
Home
| Forums
| Order Support
Today's Featured Article -
New Hitches For Your Old Tractor - by Chris Pratt. For this article, we are going to make the irrational and unlikely assumption that you purchased an older tractor that is in tip top shape and needs no immediate repairs other than an oil change and a good bath. To the newcomer planning to restore the machine, this means you have everything you need for the moment (something to sit in the shop and just look at for awhile while you read the books). To the newcomer that wants to get out and use the machine for field work, you may have already hit a major roadblock. That is the dreaded "proprietary hitch". With the exception of the
... [Read Article]
Latest Ad:
one 8n and one 9n tractor. totaly restored,pretty much everything is new. one 6ft blade good shape.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|