|
Tractor Talk Discussion Board |
Re: Monarch diesel with low-pressure injection?
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Gerald J. on September 22, 2006 at 18:29:57 from (67.0.102.113):
In Reply to: Re: Monarch diesel with low-pressure injection? posted by jdemaris on September 22, 2006 at 14:06:27:
I almost bid on a manual in Alaska but the seller wanted to only tell shipping costs after the auction closed and I don't like the surprises that policy can give. 400 Hz three phase does interfere with much house use. It will run the TV, the computer, the battery charger, and incandescent lamps, maybe fluorescents with solid state ballasts, but not older ballasts or motors except for series motors. It would run resistance heaters, but not their fan motors. It would be almost practical to run a 3 phase battery charger with it and run inverters from the battery for 60 Hz loads. Rewinding the core probably isn't practical. I suspect the high frequency comes from a few poles of aternator but with notched pole faces to get 400 Hz without having to have a 16 pole alternator running at some obnoxiously high speed. Years ago, I would have been interested in the 400 Hz capability since I had some military surplus radios that needed 400 Hz power, but they have wandered off as did a 400 Hz motor driven alternator that I had. Seems when I loaned it out, that party moved away and forgot it was a loan and took it with him. These days I have good 60 Hz alternators and for some applications don't need several KW of power and for some things get along fine with 10 amps at 12 volts. Gerald J.
Replies:
Home
| Forums
| Order Support
Today's Featured Article -
12-Volt Conversions for 4-Cylinder Ford 2000 & 4000 Tractors - by Tommy Duvall. After two summers of having to park my old 1964 model 4000 gas 4 cyl. on a hill just in case the 6 volt system, for whatever reason, would not crank her, I decided to try the 12 volt conversion. After some research of convert or not, I decided to go ahead, the main reason being that this tractor was a working tractor, not a show tractor (yet). I did keep everything I replaced for the day I do want to restore her to showroom condition.
... [Read Article]
Latest Ad:
1958 FORD RARE 4x4 801 TRACTOR, ELENCO/FRONT DRIVE, FRONTLOADER AND WEIGHTED REAR WHEELS, FIVE SPEED, LIVE PTO, GAS ENGINE, NEW REAR WHEELS AND TIRES, ENGINE RUNS.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|