Re: Need to split a Farmall 504

Posted by Gary in Mozarks on September 22, 2006 at 10:16:00 from (64.240.21.163):

In Reply to: Need to split a Farmall 504 posted by Tom in Mich. on September 22, 2006 at 10:05:00:

When I split my 460 (first timer) I made a rectangular 3 sided frame out of angle iron that bolted to the side of the tranny case and came down about a foot from the ground. I used a floor jack to support it and the whole rear end rolled back easy. I supported the back end of the engine with a chainfall, which stayed stationary. Worked pretty good. G

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]