|
Tractor Talk Discussion Board |
Re: Massey Ferguson MH-50 Sticking in Gear
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk Discussion Board ]
Posted by IvanB on August 13, 1999 at 15:09:17 from (207.18.199.196):
In Reply to: Massey Ferguson MH-50 Sticking in Gear posted by Bill Jamie on August 13, 1999 at 11:27:07:
Bill,
I have had the same exact thing happen to me on a borrowed MH-50. It was stuck in reverse and you couldn't move the gear shift lever. If you open the fill hole just to the left of the gear shift lever, you can use a long screwdriver to move the gear back to neutral. You have to know which gear though so don't just go start prying around in there. The gear will move very easily as long as there is no tension on the transmission (clutch in etc.). Once the gear is back in position, the gear shift will be back in it's proper place on the shifting fork. If you need more detail, email me at birdsi@hotmail.com.
Good luck,
Ivan
Follow Ups:
Post a Followup
|
