Re: Rim modification

Posted by Ken Combs on September 11, 2006 at 13:11:21 from (70.143.61.75):

In Reply to: Rim modification posted by Chris Cash on September 11, 2006 at 09:59:49:

I have done something similar several times. Just completed a set for a little Mitsubishi, redrilled a set of John Deere wheels, worked fine. Reinforcement or welding the old set closed isn't needed. Just offset the new set so that they fall 1/2 way between the old ones. You wind up with twice as many holes but it has not been a problem for me.

Several companies make and sell dual pattern (5 on 4.5 and 5 on 4.75) wheels for cars and pickups. They are a lot thinner metal and have much higher cornering forces and last ok.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]