Re: Converting a B Farmall to a BN

Posted by gene bender on September 09, 2006 at 15:27:33 from (67.55.226.214):

In Reply to: Converting a B Farmall to a BN posted by BillNmo on September 09, 2006 at 04:48:34:

Are you planning on using rear mounted types of tooling such as cults or moldboard plow? The A diff housings do not have the bosses to mount any of the rear type tooling. The left diff shaft will have to be shortened 4in. You can use the right one from an A. I have two BNs and parts to make another if you want to buy some. The drawbar is not hard to narrow the 8in needed. What is your location as they are heavy. You have plenty of power traction is the big item. What items do you plan on using?

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]