Re: Converting a B Farmall to a BN

Posted by JT on September 09, 2006 at 06:17:55 from (70.226.204.187):

In Reply to: Converting a B Farmall to a BN posted by BillNmo on September 09, 2006 at 04:48:34:

The only differance between the B and the BN is the BN has 18" axles and the B has 22" axles. As for putting the A final drive on a B tractor, unless you are using in on flat ground only, it could be a death trap, it makes the tractor so narrow it can be upset very easily. As for putting a C engine in it, if I am not mistaken the A, B and the C had a C113 engine, I think they increased engine RPM to increase horsepower.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]