Re: regarding FWA and tire size question

Posted by MSM on September 03, 2006 at 08:21:57 from (62.12.37.3):

In Reply to: regarding FWA and tire size question posted by DAN9-Midwest on September 03, 2006 at 07:57:40:

You may want to go back to the bias tires depending on how you use the tractor(alot of 4wd use,especially on hard surfaces,or loader use)The ratio is far enough off to cause some noticible driveline bind in 4wd,but you further aggravated the situation by mixing radials and bias tires which have different traction characteristics.I would go all bias,or all radials,and not mix them.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]