Re: Cut Out on 6v Generator

Posted by BLW on August 28, 2006 at 07:34:57 from (4.156.138.252):

In Reply to: Re: Cut Out on 6v Generator posted by John T on August 26, 2006 at 17:40:20:

hi just copied your list of 6 v gen probs-- I have a ferg 20 that doesn't chg- I worked on these years ago but lost my books and my mind is getting a little foggy-- do you have any info on these 6 v's the gen has two con. field and arm but the reg has four screws on the bottom and one on the top--w/ two coil & points inside-- any tips on this couldn't get it to motor-- but the other day when fooling with it it started charging and was wavering then it stopped again--how critical is the point setting (gap) on the set that opens when the tractor is stopped--> thanks for any info [email protected]

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]