Re: Question for Hydraulics expert

Posted by Old Pokey on August 26, 2006 at 21:01:17 from (216.99.197.244):

In Reply to: Question for Hydraulics expert posted by Double M on August 26, 2006 at 20:43:11:

No problem. The cylinder will get plenty of oil for lube. You can buy a screw in filter for that purpose from any hydraulic retailer. They're sometimes called a "muffler". Dont know why they call it that, but when I ask for a cylinder muffler, the parts guy can find it in the book a lot faster. Something you might even consider since the cylinder will wear over time, is to run a pipe or hose from the end you put the muffler on down to a place where any oil that gets by the seals wont splash all over the tractor, or worse, you. Then put the muffler on the end of the pipe or hose.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]