Re: cutting speed

Posted by CNKS on August 21, 2006 at 20:05:30 from (204.249.178.138):

In Reply to: cutting speed posted by raleigh on August 21, 2006 at 18:15:50:

Assume a speed of 4 mph. You can go 4 miles, 5280x4 = 21120 ft in 60 minutes. Using elementary ratio and proportion: 60 min/21120 ft = x/7260 ft. x=20.625 minutes/acre or roughly 3 acres/hr. The 7260 is 43560 sq ft per acre/6 ft cutting width. In other words you have to travel 7260 linear ft to cut an acre with a 6 ft cutting width.Put in some sort of fudge factor for turns, used to know that estimate, but have forgotten, adjust for speed. I'm not responsible for mathematical errors!

Replies:

• Re: cutting speed sammy the RED 20:30:20 08/21/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]