Re: Starting Long-Stored Equipment Checklist

Posted by CNKS on August 12, 2006 at 12:02:57 from (204.249.178.138):

In Reply to: Re: Starting Long-Stored Equipment Checklist posted by noncompos on August 12, 2006 at 11:47:23:

My intent was not to provide injury. I have often looked on the internet for things I know nothing about. Sometimes successful sometimes not. What has worked is usually no single article or person, but a composite of many opinions and explanations. I doubt if there is a comprehensive discussion of what you want. Basically you remove the plugs and valve cover, put oil in the cylinders and turn it over many times until you think you have complete lubrication then try to start. Also best to pull the oil pan, and clean it out good. Now you have what I consider to be, as I said, "just someone's opinion".

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]