|
Tractor Talk Discussion Board |
Hey Allen in NB Buick Transmission again
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by IA Roy on August 08, 2006 at 19:49:51 from (69.66.77.182):
By the time I got the bolt out, I had added up about 4 ft of extensions. I got a replacement trans for the 91 Park Ave. The pan on one says 4T60E and there is a "713" cast on the bell housing. The other one says metric and has a "711" cast on the bell housing. I got the replacement from a "good" boneyard. They appears to be identical. What is the difference? The reason I ask is that I dropped the replacement one about 6 ft and broke off the steel pilot hub that the Torque Converter fits on. I dismantled the burned transmission without breaking anything on it and would like to transplant the guts if they are the same. If they are not, I can probably press out the steel pilot hub from one and back into the other. What is your opinion?
Replies:
Home
| Forums
Today's Featured Article -
My Ford Golden Jubilee - by Troy Estes. This article is about my '53 Ford Jubilee and a story that starts with taking the tractor to my brother's Starter/Alternator Rebuilding shop for a wiring fix. The generator was shot as well as all the wiring. I dropped off the tractor expecting a transformation from a 6 volt to a 12 volt system utilizing the original generator housing, and a total rewiring of the whole tractor. The front end center pin bushing was worn also so I ask that they replace it if they had time. Well, that’s wha
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
