Re: FIT brand bearings, are they good bearings?

Posted by van robinson on August 03, 2006 at 19:21:13 from (12.2.24.11):

In Reply to: FIT brand bearings, are they good bearings? posted by Mike S 806/H on August 03, 2006 at 15:35:38:

fafnir bearings are good bearings. I have used them on many occasions. Fafnir is part of the Torrington company which is part of Ingersoll Rand. If you check out the link below, it takes you to a product page on the timken web site. They have listed bearings under the timken-torrington name and timken-fafnir name. I would not hesitate to use fafnir bearings. They are among the best made. I would even put them up against timken. As a lead maintenance tech on precision CNC machines, I rely on fafnir for a lot of my bearings.

• timken- fafnir bearings

Replies:

• Re: FIT brand bearings, are they good bearings? Gene Davis (Ga.) 19:31:00 08/03/06 (1)
  • Re: FIT brand bearings, are they good bearings? Gene Davis (Ga.) 19:34:15 08/03/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]