Tractor Talk Discussion Board |
Re: OT-98 GMC- Wiring Brake Controller
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by John M on July 28, 2006 at 14:00:48 from (64.53.75.223):
In Reply to: OT-98 GMC- Wiring Brake Controller posted by Formerly Pamike on July 28, 2006 at 09:34:32:
There is no adapter so to say under the dash,but there are some spots on that fuse box where you can hook at least the power and the brakes to. I found it by accident on my 98 looking for something else.You dont have to splice into the switch up there,there is a bundle of wire near the column that has a white wire that you can splice into.The "charge" wire and the power wire for the trailer brakes are under the hood. and the owners guide has the correct hookups in there for those.
Replies:
Home
| Forums
Today's Featured Article -
The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|