Re: How to decide what size brushhog to buy?

Posted by Fred Martin on July 25, 2006 at 15:26:50 from (69.218.163.41):

In Reply to: How to decide what size brushhog to buy? posted by Bill A on July 25, 2006 at 09:04:05:

I used to run a 6" rotary cutter on a 9N Ford and I had to keep the blades sharp, sometimes everyday as I was mowing whole farms for a realty company. The 9N had a good strong engine and would lift the mower but it was heavy at around 700 lbs. Only once did I have to set the mower up high to open up a field...and then if the tractor started pulling down, I would just move over away from the cut. You have to hang it on chains to lift it up for the first cut. Fred OH

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]