Stop Leak

Posted by Kritter on July 24, 2006 at 14:37:52 from (144.226.173.68):

I patched the radiator on my Ford 2000 with JB Weld, I had about 5 holes. The JB Weld didn"t seal them up totally but adding some Barrs Stop lead did the trick.

Question: should I drain and flush the radiator so any leftover Barrs is cleaned out?

There are several kinds of stop leak barrs makes, I used the tablets that you crumble into the radiator.

Oh yea, after fixin the radiator figured I needed to knock down some of the 3-4 foot brush that was growin around the place with the brush hog. Everything going fine, when I looked toward the house (about 100" away) noticed my trucks back window was laying in a million pieces. So much for a good day.

Replies:

• Re: Stop Leak Jak 14:50:14 07/24/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]