Re: 327 v 400

Posted by Tim...Ok on July 21, 2006 at 09:09:11 from (66.137.61.93):

In Reply to: 327 v 400 posted by bm3501466 on July 21, 2006 at 08:24:36:

Yep,like Allan said,same physical size,same bellhousing,same motor mounts..One thing to remember,if your going to use heads off of another smallblock on a 400,they'll bolt right on,but there are steam holes that MUST be drilled in the heads or it WILL overheat..use the 400 head gasket as a guide to drill these holes... the 400 uses a siamezed block so it requires these holes,where all other smallblocks do not..

You'll love the grunt a 400 has compared to other smallblock chevies..makes the rest seem kinda wimpy :0)

Tim

Replies:

• Re: 327 v 400 Jak 12:51:24 07/21/06 (3)
  • Re: 327 v 400 Allan In NE 15:40:19 07/21/06 (2)
    • Re: 327 v 400 Allan Tim...Ok 05:01:04 07/22/06 (0)
    • Re: 327 v 400 jdemaris 18:55:48 07/21/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]