Re: Machine Shed Floor

Posted by RustyFarmall on July 17, 2006 at 10:44:01 from (216.248.75.185):

In Reply to: Re: Machine Shed Floor posted by Larry Hardesty on July 17, 2006 at 09:05:19:

Not sure how thick the barrier was, maybe 6 mil? I hired a seperate contractor to level the sight, I told him I wanted a good, firm clay base, and I would pay him to haul in the clay if he knew where to find it. He told me that where I lived, he would guarantee that I already had all the clay needed, he would just have to dig a bit to find it. He did have to dig deeper than he originally thought, but he found it, and when he was done with the sight, it was just like a paved highway. In fact, the truck that delivered the building had to drive over the sight so he could unload on the opposite end, and that fully loaded 18 wheeler did not even leave a mark.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]