Re: Any one ever cut grain with a binder

Posted by Jimmy King on July 16, 2006 at 20:17:55 from (207.69.137.7):

In Reply to: Re: Any one ever cut grain with a binder posted by The Dukester on July 16, 2006 at 13:48:07:

Granddad had a 10ft IH pto binder,I just do remember him buying it new when I was very small. He had a 8 ft horse binder before that. We always pulled the binder with my Uncle's B or Dad's Super A in third gear wide open. If it was very wet we would have to put the H on it, not uaually a problem in Southwest MO. I was started driving the tractor when I was about 10, one of the biggest but chewings I ever got was because I wasn't making square corners, and holding the binder over to cut the full 10 ft

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]