Re: Tractor Shed

Posted by TomTX on July 13, 2006 at 12:40:14 from (12.74.205.70):

In Reply to: Tractor Shed posted by Danny Prosser on July 13, 2006 at 09:40:39:

Lay vapor barrier plastic under the slab. Would use #4 or #5 rebar, 18" o.c. in both directions. Overlap the 20 foot pieces about 8 to 12" . Use pigtail and twist wire ties on each "crossing point" and on the overlaps. Stop rebar about 3 inches from edge of slab. Set rebar on plastic "chairs" which suspend it to about center of your slab. Use what we call "five sack" concrete mix. Every slab that I have seen demolished, where they had used the wire mesh, cattle panels, woven wire, etc, when they flip the slab over, there is the mesh, right on the bottom. Rebar is the way to go. Tom

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]