Re: Connecting Int'l 2050 Loader

Posted by in-too-deep on June 29, 2006 at 14:25:19 from (66.79.66.208):

In Reply to: Re: Connecting Int'l 2050 Loader posted by Shep Va on June 29, 2006 at 05:50:36:

Gosh it's nice to have folks like Shep around! The dealership was new to the idea of plugging one of those holes, but I insisted. Through a phone call and computer searching we found out to plug the top hole, the smaller one. Off to ACE hardware I went for a 3/8 in. flush plug. Threaded the hole, screwed in the plug, and put the tractor back together. Loader runs a bit slow for my tastes, but that's ok, it works! Thanks again.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]