Re: Farmall H M rear wheel weight bolts

Posted by RustyFarmall on June 28, 2006 at 04:49:20 from (216.248.75.137):

In Reply to: Re: Farmall H M rear wheel weight bolts posted by Nebraska Kirk on June 27, 2006 at 19:54:44:

You would also need a lathe so you could turn down the shank a bit. The threaded portion of those bolts is slightly smaller O.D. You can use a die and run the threads down a bit further, but the threads do not cut cleanly and you run the chance of breaking the die. Not to mention that it takes a whole lot of muscle. Just about any farm machinery dealer will have the 4 1/2" bolts in stock. A common hardware or farm supply type store will not have them.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]