Re: Getting Farmall Sleeves Out

Posted by Beck on June 27, 2006 at 06:21:34 from (199.150.177.135):

In Reply to: Getting Farmall Sleeves Out posted by MartinD on June 27, 2006 at 05:48:17:

The sleeve puller is easy to make yourself, but the disc is another matter. Close isn't good enough, it has to fit just right as it can't hit the cylinder walls, but still has to grab the sleeve. It has to be stepped to fit into the end of the sleeve and the hole for the threaded rod has to be exactly in the center. I assume that you are putting in new sleeves since you are taking out the old ones. Why not order the new sleeves and take one of them to your local machine shop and get them to make a disc to fit it. Those sleeves can be in there pretty tight, so you have to have a good setup.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]