|
Tractor Talk Discussion Board |
Re: need some help!
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by IBorange in TX on June 18, 2006 at 20:35:48 from (24.155.169.224):
In Reply to: need some help! posted by Tim Shultz on June 18, 2006 at 17:50:06:
I agree w/ KEH, replace the PCV(Positive Crankcase Valve)on the right bank. Wash out the filler cap on the left bank and also wash the little filter that is inside the airfilter. If there is not one in there, put one there. It is sorta moon shaped and should be cleaned each time oil is change. The oil fumes from the crankcase is drawn up thru the left bank, thru the PCV and into the carb base. You might also check the hose that goes from the PCV to the carb base. If the PCV is closed then the oil fumes will back up thru the left bank and into the air cleaner, then condense back into oil. Sorry about the length, Good Luck......
Replies:
Home
| Forums
| Order Support
Today's Featured Article -
Product Review: JB Weld - by Staff. JB Weld is basically an epoxy glue that does an exceptionally good job of bonding to cast iron and steel along with several other materials. As I mentioned, it is so common that I have yet to buy a tractor that did not have JB Weld used somewhere. It is sometimes used so well you can't tell its there and other times used as a sloppy quick fix. Finding where and how it can be used correctly is key to whether you are using it as an "inelegant hack" or an integral solution to difficult and expens
... [Read Article]
Latest Ad:
WANTED Front grille/nose assembly for Massey Ferguson 1160 (also fits 1180 & 1190). Headlight-mount section. AGCO Grille 3706022M91 (supersedes 3705942M91), cover 3705494M1/M2, holders 3705501M91/3711158M92. New/NOS/good used OK. Jonesboro, AR - will pay shipping. Photo appreciated. Thanks
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|