Filter for IH 300U Wagner Loader Hyd Pump

Posted by Kerwin on June 18, 2006 at 06:13:31 from (207.230.193.10):

I need to install a filter in my 300U's loader hydraulic system. It's a Wagner loader with a pump run off of a front PTO shaft. Originally there was a strainer on the suction side of the pump, but that was lost by a previous owner so it's running unfiltered at the moment.

I would like to add a 25 micron spin-on filter in place of the strainer. With it on the suction side (and not return), will this put too much strain on the pump? It will be using 3/4-inch. NPT, which is what the original strainer was plumbed with, from what I can tell. I figured the 25 micron would be a little less restrictive than a 10 micron. Any thoughts? Thanks.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]