Re: John Deere mower belt question..

Posted by Bob on June 16, 2006 at 11:53:30 from (64.21.249.40):

In Reply to: John Deere mower belt question.. posted by mike in New Mexico on June 16, 2006 at 11:00:25:

Do you have the correct (length) belt?

You mean the belt from the engine to the deck, right?

Is it a #46 mower?

I don't have a diagram at hand, but it goes around the sheave on the engine, the flat backside of the belt runs against the flat idler, the "V" side of the belt runs in the "V"-shaped idlerer, then the belt loops around the sheave on the mover. Pretty basic.

If you are going to keep it around, you need an owner's manual for the TRACTOR, AND the DECK.

Check sources such as ebay, or get them direct from Deere by phoning 1-800-522-7448. They are a bit pricey, but INVALUABLE for safe operating and maintenance issues!

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]